What Size Whole House Generator Do I Need?
Most homes need a whole house generator between about 18 and 26 kilowatts to run everything, or 10 to 14 kilowatts to cover the essentials. The exact size depends on your air conditioning, which is the biggest load, so the honest way to size a unit is a load calculation rather than a rule of thumb.
The question of what size whole house generator you need is answered in kilowatts, and the right number depends on whether you want the entire home running or just the essentials. Run everything and most homes land somewhere around 18 to 26 kilowatts. Cover only the must haves and 10 to 14 kilowatts often does it. In a hot climate the deciding factor is almost always the air conditioning, so here is how to size a unit properly instead of guessing.
Sizing Is Measured in Kilowatts
Generator capacity is rated in kilowatts, and matching it to your home is the single most important buying decision. Too small and it stalls or shuts down under load. Too large and you have overpaid for the unit and the install. The goal is a unit that comfortably carries your real peak demand.
Whole Home vs Essential Circuits
| Coverage | Typical size |
|---|---|
| Essentials only | 10 to 14 kilowatts |
| Most of the home | 16 to 22 kilowatts |
| Everything at once | 22 to 26 kilowatts or liquid cooled |
Deciding how much of the house you want powered comes before picking a number, since running everything at once needs far more capacity than keeping the fridge, some lights, and one air conditioner alive.
The AC Load Drives Phoenix Sizing
In the Valley, central air conditioning is the load that sets the size. A large AC system draws a heavy surge the moment its compressor starts, and a generator that cannot handle that surge will struggle exactly when you need cooling most. Sizing here means sizing for the air conditioning first and the rest second.
If you have two AC units or a very large system, tell whoever sizes the generator. Multiple compressors starting can push you from an air cooled unit into a larger one.
How to Estimate Your Size
List the appliances and systems you want to run in an outage.
Note the running and startup watts of each, especially the AC.
Add the running loads, then account for the largest startup surge.
Match that total to a unit with headroom, not the bare minimum.
Get a Real Load Calculation
Wattage lists get you a rough idea, but the reliable way to size a whole house generator is a load calculation by someone who installs them. They account for your panel, your AC surge, and code, and it costs far less than buying a unit that turns out to be too small.
Undersizing to save money is the most common and most expensive mistake. A generator that cannot start your air conditioning leaves you without cooling in a summer outage, which in this climate is the whole reason you bought it.
Frequently Asked Questions
What size whole house generator do I need?
Around 18 to 26 kilowatts to run an entire home, or 10 to 14 kilowatts for the essentials. The exact size depends on your air conditioning, so a load calculation is the reliable way to decide.
How many kilowatts to run a whole house?
Most homes need roughly 18 to 26 kilowatts to run everything at once, with large homes or heavy air conditioning pushing toward the top or into a liquid cooled unit.
What size generator do I need for my air conditioner?
The AC is usually the largest load, and it surges hard on startup. The generator must be sized to handle that surge, which often decides the whole unit size, so have it calculated for your specific system.
Can a generator be too big for a house?
Yes. An oversized unit costs more to buy and install and runs inefficiently under light load. The aim is a unit that comfortably covers your peak demand with some headroom, not far beyond it.
How do I calculate what size generator I need?
List what you want to run, add the running watts, account for the largest startup surge, and match it to a unit with headroom. For accuracy, have an installer do a load calculation.




